Tucson V6-2.7L (2005)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0736 Set in TCM
Group:
TRANSAXLE
Number:
05-40-013
Date:
AUGUST, 2005
Model:
2005 TUCSON 2.7L
Subject:
2005 TUCSON 2.7L TCM REPROGRAMMING INSTRUCTIONS FOR DTC P0736
DESCRIPTION:
Some 2005 MY Tucson vehicles with 2.7L engines may experience the following symptoms even though there are no system faults:
1.
Check Engine" light illuminated, and
2.
Diagnostic Trouble Code P0736 (Reverse Gear Incorrect Ratio) stored in the Transaxle Control Module (TCM).
NOTE:
There are no vehicle performance issues associated with this condition.
This bulletin provides a procedure to reprogram the TCM software using the Hi-Scan Pro.
VEHICLES AFFECTED:
^
Model: All 2005 Tucson vehicles with 2.7L engines
TCM SPECIFICATIONS
CAUTIONS DURING REPROGRAMMING:
1.
Perform reprogramming with the ignition key in the ON position.
2.
Be careful not to disconnect any cables connected to the vehicle or Hi-Scan Pro during reprogramming.
3.
Do not start the engine during reprogramming.
4.
Do not turn the ignition key OFF during reprogramming.
5.
When the reprogramming is completely done, wait for about 20 seconds with the ignition key OFF and start the engine for confirming normal