Tucson AWD L4-2.0L (2007)
Sunroof / Moonroof Motor: Programming and Relearning
How to Initialize Motor
ADJUSTMENT
HOW TO INITIALIZE MOTOR
1. Check that the glass has been installed.
-
Finished height adjustment.
2. Push the up switch. (Keeping on pushing the switch)
-
The slide moved 5 mm forward after 15 seconds.
3. After moving the slide 5 mm forward, turn OFF the switch and push the UP switch (Keeping on pushing the switch with continuous operation)
-
If the operation above is normal condition, the sunroof once and closes.
4. When the sunroof is closed completely, turn OFF the UP switch initialize the motor completely.
When to Initialize the Motor
WHEN TO INITIALIZE THE MOTOR
1. First operation the vehicle after manufacture it.
2. Initial value is erased or damaged because of short power electric discharge during operation
3. After using the manual handle.
