Tucson AWD L4-2.0L (2007)
Blower Motor: Service and Repair
BLOWER UNIT
REPLACEMENT
1. Disconnect the negative cable from the battery.
2. Remove the crash pad.
3. Disconnect the connectors from the blower relay the blower motor, the blower resistor (or power transistor) and the fresh and recirculation
actuator.
Remove the self-tapping screws(A), the mounting nut(B), the mounting bolt(C) and the blower unit(D).
NOTE: Make sure that there is no air leaking out of the blower and duct joints.
4. Install in the reverse order of removal.