Tucson AWD L4-2.0L (2007)
Fuel Gauge Sender: Service and Repair
SUB FUEL SENDER
REMOVAL
1. Turn ignition switch to "OFF" and disconnect the battery negative (-) terminal.
2. Remove the rear seat cushion flame hinge bolts, and then lift the cushion.
3. Remove the service cover (B) under the carpet.
4. Disconnect the sub fuel sender wiring connector (A).
5. Disconnect the suction hose (B).
6. Remove the sub fuel sender plate mounting bolt (C).
7. Remove the sub fuel sender assembly.
INSTALLATION
1. Install the sub fuel sender according to the reverse order of "REMOVAL" procedure.