Tucson AWD L4-2.0L (2007)
1.
The bracket positions are marked on the inside surface of the glass.
2.
With the backlight placed on a clean work surface, clean the bracket mounting locations (2) with a "Scotchbrite" type pad.
NOTE:
Use 3-M Scotchbrite pad # 7448 or similar.
3.
Clean them again with a wax and grease remover, then clean them with an alcohol wipe.
4.
Mix a small amount of the adhesive or use the applicator gun and mixing tube to apply a small amount of adhesive to the mounting area.