Tucson AWD L4-2.0L (2007)
3. Check the carrier for cracks.
INSTALLATION
1. Install the rear axle carrier (A).
a. Install the strut mounting nuts (D).
Tightening torque 140 - 160 Nm (1400 - 1600 kgf-cm, 103.3 - 1118.0 ft. lbs.)
b. Install the suspension arm mounting nut (C).
Tightening torque 160 - 180 Nm (1600 - 1800 kgf-cm, 118.0 - 132.8 ft. lbs.)
c. Install the trailing arm mounting bolt (B).
CAUTION: Replace the self-locking nut with new ones after removal.
2. Install the rear dust cover (B) and then tighten the mounting bolts (A).