Tucson AWD L4-2.0L (2007)
1. Install the oil pump (A) to the oil pump bracket.
2. Hang the "V" belt on the oil pump and connect the suction hose (A) and the pressure hose (B).
NOTE: Install the hose being careful so that it does not twist and come in contact with other components.
3. Insert a bar (C) or similar tool between the bracket (A) and the oil pump (B) to produce tension and confirm that belt deflection is within the
standard value.
4. Add power steering fluid.
5. Air bleed the system.
6. Check the oil pump pressure.