Tucson AWD L4-2.0L (2007)
4. Install the oil seal (A) in the rack bushing (B).
5. Apply the specified fluid to the entire surface of the O-ring and install it in the rack bushing.
6. Apply the specified grease to the rack teeth.
Recommended grease: Multipurpose grease SAE J310, NLGI No.2
NOTE: Do not plug the vent hole (A) in the rack with grease.
7. Insert the rack into the rack housing and install the rack bushing and rack stopper.
8. Install the oil seal and the ball bearing in the valve body.
9. After applying the specified fluid and grease to the pinion valve assembly (A), install it in the rack housing assembly.
