Tucson AWD L4-2.0L (2007)
e. If the direction of split pin is not in line with the hole of knuckle unfasten hub bearing nut within 300 and assemble split pin.
REMOVAL
1. Loosen the wheel nuts slightly.
Raise the front of the vehicle, and make sure it is securely supported.
2. Remove the front wheel and tire (A) from front hub (B).
CAUTION: Be careful not to damage the hub bolts (C) then remove the front wheel and tire (A).
3. Remove the split pin (A), then remove castle nut (B) and washer (C) from the front hub while applying the brake.
