Tucson AWD L4-2.4L (2010)
Rear Door Striker: Adjustments
Adjustment
Door Striker Adjustment
Make sure the door latches securely without slamming it. If necessary adjust the striker (A): The striker nuts are fixed. The striker can be fine adjusted up
or down, and in or out.
1. Loosen the screws (B) just enough for the striker to move.
Tightening torque (B) :
8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft )
2. Tap on the striker with a plastic hammer to adjust the striker. The striker will not move much, but will give some adjustment.
3. Hold the outer handle out, and push the door against the body to be sure the striker allows a flush fit. If the door latches properly, tighten the
screws and recheck.
