Tucson AWD L4-2.4L (2010)
Trim Panel: Service and Repair
Center Pillar Trim Replacement
Replacement
Center Pillar Trim Replacement
NOTE:
-
Put on gloves to protect your hands.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to bend or scratch the trim and panels.
1. Remove the front door scuff trim and rear door scuff trim.
2. After loosening the mounting bolt, then remove the front seat belt lower anchor (A).
3. Remove the center lower pillar trim (B).
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb.ft)
4. Remove the cap, loosen the mounting bolts.
5. Remove the center upper pillar trim (A).
6. Installation is the reverse of removal.
NOTE:
-
Replace any damage clips.