Tucson AWD L4-2.4L (2010)
Sunroof / Moonroof Motor: Testing and Inspection
How to Initialize
How To Initialize Motor
Whenever the battery is disconnected, discharged or the related fuse is replaced or reinstalled, the panoramaroof system must be reset according to the
procedure below.
1. Turn the ignition key to the ON position and then close the panoramaroof completely.
2. Release the panoramaroof control lever.
3. Press and hold the CLOSE button for more than 10 seconds until the sunroof has moved slightly.
4. Release the panoramaroof control lever.
5. Press and hold the CLOSE button once again until the sunroof do as follows.
A. Tilt -> Slide Open -> Slide Close
Then, release the lever.
6. Reset procedure of panorama system is finished.