Tucson AWD L4-2.4L (2010)
5. Pump the brake pedal several times, and then loosen the bleeder screw until fluid starts to run out without bubbles. Then close the bleeder
screw(A).
Front
Rear
6. Repeat step 5 until there are no more bubbles in the fluid for each wheel.
7. Tighten the bleeder screw.
Bleed screw tightening torque:
7 - 13 Nm (0.7 - 1.3 kgf.m, 5.4 - 9.5 lb-ft)