Tucson AWD L4-2.4L (2010)
D. After applying liquid sealant Loctite 5900H or THREE BOND 1217H on timing chain cover. The part must be assembled within 5 minutes
after sealant was applied. Sealant should be applied without discontinuity.
Bead width :3.0mm(0.12in.)
E. The dowel pins on the cylinder block and holes on the timing chain cover should be used as a reference in order to assemble the timing chain
cover to be in exact position.
Tightening torque :
6x25 : 7.8 - 9.8N.m (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)
8x28 : 18.6 - 22.5N.m (1.9 - 2.3kgf.m, 13.7 - 16.6lb-ft)
10x45 : 39.2 - 44.1N.m (4.0 - 4.5kgf.m, 28.9 - 32.5lb-ft)
10x40 : 39.2 - 44.1N.m (4.0 - 4.5kgf.m, 28.9 - 32.5lb-ft)
F. Running the engine or performing a pressure test should not be performed within 30 minutes of assembly.
11. Install the oil pan.
A. Using a gasket scraper, remove all the old packing material from the gasket surfaces.
B. Before assembling the oil pan, the liquid sealant Loctite 5900H or THREEBOND 1217H should be applied on oil pan. The part must be
assembled within 5 minutes after the sealant was applied.
Bead width:3.0mm (0.12in)
CAUTION:
-
When applying sealant gasket, sealant must not protrude into the inside of oil pan.
-
To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.