Tucson AWD L4-2.4L (2010)
Instrument Cluster / Carrier: Service and Repair
Crash Pad
Replacement
Cluster Replacement
NOTE:
-
When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
-
Put on gloves to protect your hands.
1. Using a screwdriver or remover, remove the cluster fascia panel (A).
2. Using a screwdriver or remover, remove the cluster fascia lower panel (A).
3. After loosening the mounting screws, then remove the cluster (A).
4. Disconnect the connectors (B).
5. Installation is the reverse of removal.
NOTE:
-
Make sure the connector is plugged in properly.
-
Replace any damage clips.