Tucson AWD L4-2.4L (2010)
Tail Lamp: Service and Repair
Removal
1. Disconnect the negative (-) battery terminal.
2. Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B).
3. Turn the socket counterclockwise to remove the tail/stop lamp bulb (A) and turn signal lamp bulb (B).
4. Loosen the nuts (A) after removing the tailgate lamp cover.
5. Remove the tailgate lamp (B) after disconnecting the connector (A).
6. Turn the socket counterclockwise to remove the back up lamp bulb (A) and tail lamp bulb (B).