Tucson AWD L4-2.4L (2010)
Evaporative Canister Filter: Service and Repair
Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Lift the vehicle with a jack.
3. Disconnect the canister close valve connector (A).
4. Disconnect the ventilation hose (B) and vapor hose (C).
5. Remove the fuel tank air filter and canister close valve assembly (A) after removing the installation nut (B).
6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in
the figure.
7. Install a new fuel tank air filter in accordance with the reverse order.
