Tucson AWD L4-2.4L (2010)
![background image](/hyundai/tucson_awd/l4-2.4l/Page-2971001.png)
Windshield: Service and Repair
Repair Procedures
Removal
CAUTION:
-
Put on gloves to protect your hands.
-
Use seat covers to avoid damaging any surfaces.
1. Remove the following items.
A. Front pillar trim
B. Inside rearview mirror
C. Rain sensor
D. Wiper arm
E. Cowl top cover
F. Windshield glass deicer connector
2. Using a screwdriver or remover, remove the windshield molding (A).
3. Cut out the sealant using the sealant cutting tool [A(09861-31100)].
4. Remove the windshield (B) carefully using the glass holder (A).
Installtion
1. With a knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire windshield opening