Tucson AWD L4-2.4L (2010)
Installation
1. Install the rear wiper motor assembly.
Tightening torque Nut :
7 - 10 Nm (0.7 - 1.0 kgf.m, 5 - 7.4 lbf.ft)
NOTE:
Do not reuse the rubber pad if it is damaged.
2. Install the tailgate trim.
3. Insert the pad cap and HEX nut.
Tightening torque :
4 - 7 Nm (0.4 - 0.7 kgf.m, 2.9 - 5.0 lbf.ft)
4. Install the rear wiper arm and blade to align with black lowest rear defogger line (A).
5. Install the rear wiper arm and rear wiper nut.
Tightening torque Nut :
14 - 17 Nm (1.4 - 1.7 kgf.m, 10 - 12 lbf.ft)