Tucson FWD L4-2.0L (2007)
5. Remove the water pump.
1) Remove the 4 bolts and pump pulley.
2) Remove the 2 bolts(C), then remove the alternator brace(A).
3) Remove the water pump(B) and gasket.
INSPECTION
WATER PUMP
1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary.
2. Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary.
3. Check for coolant leakage. If coolant leaks from hole, the seal is defective. Replace the coolant pump assembly
NOTE: A small amount of weeping from the bleed hole is normal.
INSTALLATION
WATER PUMP
1. Install the water pump.