Tucson FWD L4-2.0L (2007)
Some SRS system connectors have a spring-loaded lock.
Airbag Connector
DISCONNECTING
To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector
halves apart. Be sure to pull on the sleeve and not on the connector half.
CONNECTING
1. To reconnect, hold the pawl-side connector half, and press on the back of the sleeve-side connector half in the direction shown. As the two
connector halves are pressed together, the sleeve (A) is pushed back by the pawl (C). Do not touch the sleeve.
2. When the connector halves are completely connected, the pawl is released, and the spring-loaded sleeve locks the connector.
Airbag Connector