Veracruz AWD V6-3.8L (2007)
Transmission Temperature Sensor/Switch: Service and Repair
TRANSAXLE OIL TEMPERATURE SENSOR
REMOVAL
1. Remove the TCU.
CAUTION: Do not touch the terminals.
2. Drain the oil by removing the overflow plug and the O-ring using a torx wrench (T40), and the drain plug (A) and the gasket by using a hexagon
wrench (17 mm).
3. Disconnect the oil cooler hoses from the tubes.
4. Remove the 2 bolts to remove the oil cooler tubes (A) and the O-rings.
5. Remove the transaxle side cover and the valve body assembly. )
CAUTION: Be careful not to drop the valve body assembly.
6. After removing the wire lock plate (A), remove the wire (B) from the transaxle case.
CAUTION:
-
Be careful not to damage the harness.
-
Be careful not to pull the harness forcibly.