Veracruz AWD V6-3.8L (2007)
Windshield Washer Switch: Service and Repair
WINDSHIELD WIPER/WASHER SWITCH
REMOVAL
1. Disconnect the negative (-) battery terminal.
2. Remove the steering column upper and lower shrouds (B) after removing 3 screws and connector (A).
3. Remove the wiper switch assembly after disconnecting the front and rear wiper/washer switch connectors and loosening 2 screws.
INSTALLATION
1. Connect the connectors and reassemble the wiper switch assembly.
2. Reassemble the steering column upper and lower shrouds.
