Veracruz FWD V6-3.8L (2009)
Glove Compartment: Service and Repair
Glove Box Key Cylinder Replacement
Replacement
Glove Box Key Cylinder Replacement
1. Check the position of service hole (A) of glove boy key cylinder.
2. Prepare a clip (B) and straighten its end portion as shown in the right photo.
3. Insert the key into the key cylinder with the key in the "unlock" position and then insert the clip (B) into the service hole.
4. Pull out the key cylinder (C) using the key.
5. Put a new key cylinder into the key cylinder socket.
NOTE:
-
It is possible to remove the key cylinder only when the key is in the "unlock" position. If the key is in the "lock" position, turn it into the
"unlock" position.