Veracruz FWD V6-3.8L (2009)
Seat Cushion: Service and Repair
Rear Seat
Secondary Seat
Replacement
Secondary Seat (L/H)
1. Disconnect the seat assembly mounting cover (L).
2. Loosen the mounting bolt, then remove the rear seat assembly (K).
3. Installation is the reverse of removal.
NOTE:
-
Set the seat into the floor properly.
Unbind the connecting band between the seat and slide buckle.
Tighten the bolt temporarily in the order E->D->C.
-
Set the seat into the most rearward position. Assemble the H, I temporarily, then tighten the J completely.
And tighten the H, I completely.
-
Tighten the bolt completely in the order C->D->E.
Assemble the front cover of the seat and buckle. Set the seat into the most rearward position.
-
Assemble the track cover of the seat and buckle buckle check thant the seat operates back and forth smoothly and the locking portion of seat
locks properly. And then set the seat into the most rearward position.
Seat Cushion Cover Replacement
1. After loosening the mounting bolts, remove the seat cushion assembly (A).