Veracruz FWD V6-3.8L (2009)
CAUTION:
-
Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
3. Disconnect the brake tube (B) from the master cylinder by loosening the tube flare nut.
Tightening torque :
12.7 - 16.7N.m (1.3 - 1.7kgf.m, 9.4 - 12.3lb-ft)
4. Remove the master cylinder (C) from the brake booster after loosening the mounting nuts.
Tightening torque :
9.8 - 15.7N.m (1.0 - 1.6kgf.m, 7.2 - 11.6lb-ft)
Installation
1. Installation is the reverse of removal.
2. After installation, bleed the brake system.
