Veracruz FWD V6-3.8L (2009)
Wheel Speed Sensor: Testing and Inspection
Front Wheel Speed Sensor
Inspection
1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
CAUTION:
In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ohms resister must be used as shown.
2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
V_low : 0.44V ~ 0.63V
V_high : 0.885V ~ 1.26V
Frequency range : 1 - 2,500Hz
