Veracruz FWD V6-3.8L (2009)
(6) Disconnect the LH ignition coil connector (A), the injector connector (B), the condenser connector (C) and the ground (D), and remove the
wiring harness protector (E).
(7) Disconnect the RH CMPS (A) and the OTS connector (B).
(8) Disconnect the PCSV connector (A), the MAP sensor connector (B) and the PCSV hose.
(9) Disconnect the ETC connector (A) and the knock sensor connector (B).
(10) Disconnect the water hoses (B) from ETC and PCV(C) hose.