Veracruz FWD V6-3.8L (2009)
13. Using SST (09215-3C000) remove lower oil pan (A).
NOTE:
Be careful not to damage the contact surfaces of upper oil pan and lower oil pan.
14. Set a jack to the upper oil pan.
15. Remove the PCM & relay box cover and loosen the relay box mounting bolts.
16. Remove the engine mounting bracket (A).
17. Set No.1 cylinder to TDC/compression.
(1) Turn the crankshaft pulley and align its groove with the timing mark "T" of the lower timing chain cover.
NOTE:
Do not rotate engine counterclockwise.
