hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Ambient Temperature Sensor / Switch HVAC > < Intake Actuator|Page 6692
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Rear Mode Control Actuator

Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove luggage side trim.
3. Disconnect the mode control actuator connector.
4. Loosen the mounting screws and then remove the mode control actuator (A).

5. Installation is the reverse order of removal.

Ambient Temperature Sensor / Switch HVAC > < Intake Actuator|Page 6692