Veracruz FWD V6-3.8L (2009)
5. Pump the brake pedal several times, and then loosen the bleeder screw until fluid starts to run out without bubbles. Then close the bleeder screw.
6. Repeat step 5 until there are no more bubbles in the fluid for each wheel.
7. Tighten the bleeder screw.
Bleed screw tightening torque:
6.86 - 12.74 N.m (0.7 - 1.3 kgf.m, 5.09 - 9.45 lb-ft)
