Veracruz FWD V6-3.8L (2009)
Seat Occupant Classification Module - Air Bag: Testing and Inspection
Group: ELECTRICAL
Number: 09-BE-002
Date: MARCH, 2009
Model:
2009 SONATA
2007-08 ENTOURAGE
2007-09 ELANTRA & VERACRUZ
Subject:
OCCUPANT CLASSIFICATION SYSTEM - SERVICE RESET PROCEDURE
DESCRIPTION:
The current Sonata, Entourage, Elantra and Veracruz data does not provide the Occupant Classification System reset procedure using the GDS tool. This
bulletin provides the procedure to reset the Occupant Classification System's electronic control unit (referred to as WCS (Weight Classification System)
ECU on the GDS display screen) using the GDS tool. This reset procedure should be performed after replacing the front passenger seat cover, seat
cushion pad, or seat cushion assembly.
NOTE:
Refer to the Owner's Manual section "Occupant Classification System" or the Service Data, under the Restraints Systems, for details regarding the WCS
ECU and diagnosis.
WCS ECU RESET PROCEDURE:
1. Check that the front passenger seat and the back pocket are empty.
2. Confirm the right front seat belt is not buckled.
3. Adjust the seat position according to the table above.
