Veracruz FWD V6-3.8L (2009)
Seat Occupant Sensor: Technical Service Bulletins
Restraints - Occupant Classification System Resetting
Group: ELECTRICAL
Number: 09-BE-002
Date: MARCH, 2009
Model:
2009 SONATA
2007-08 ENTOURAGE
2007-09 ELANTRA & VERACRUZ
Subject:
OCCUPANT CLASSIFICATION SYSTEM - SERVICE RESET PROCEDURE
DESCRIPTION:
The current Sonata, Entourage, Elantra and Veracruz shop manuals do not provide the Occupant Classification System reset procedure using the GDS
tool. This bulletin provides the procedure to reset the Occupant Classification System's electronic control unit (referred to as WCS (Weight
Classification System) ECU on the GDS display screen) using the GDS tool. This reset procedure should be performed after replacing the front
passenger seat cover, seat cushion pad, or seat cushion assembly.
Please write this TSB number at the bottom of the appropriate pages in the Shop Manuals, under the Restraints Section (RT), for future reference.
NOTE:
Refer to the Owner's Manual section "Occupant Classification System" or the Service Shop Manual, under the Restraints Section, for details regarding
the WCS ECU and diagnosis.
WCS ECU RESET PROCEDURE:
1. Check that the front passenger seat and the back pocket are empty.
2. Confirm the right front seat belt is not buckled.
3. Adjust the seat position according to the table above.
