hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Components and Components Location|Page 5908 > < Components and Components Location|Page 5906
Page 4
background image

3. After loosening the antenna nuts(2EA) and connector(A), remove the interior 3 antenna (B).

Exterior Bumper Antenna

1. Disconnect the negative (-) battery terminal.
2. Remove the rear bumper. 
3. After loosening the antenna connector(A) on the right side of rear bumper and nuts(2EA), remove the interior exterior bumper antenna (b).

Buzzer

1. Disconnect the negative (-) battery terminal.
2. Remove the buzzer(A) in the clip hole after disconnecting the connector on the side rail panel

Door Outside Handle

1. Disconnect the negative (-) battery terminal.
2. Disconnect the connector after removing the door trim. 
3. After loosening the mounting bolt and cap(A), then remove the key holder (B).

Components and Components Location|Page 5908 > < Components and Components Location|Page 5906