Veracruz FWD V6-3.8L (2009)
Installation
1. Install the front lower arm to the sub-frame and then tighten the bolts (A, B) and nuts.
Tightening torque :
140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)
2. Connect the lower arm (B) ball joint with the knuckle and then tighten the bolt and nut (A).
Tightening torque :
100 - 120N.m (10.0 - 12.0kgf.m, 72 - 87lb-ft)
3. Install the split pin to the bolt.
4. Install the front wheel & tire.
Tightening torque :
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)