Veracruz FWD V6-3.8L (2009)
14. Remove the bushing (A) and the bracket (B) from the stabilizer bar.
Installation
1. Install the bushing (A) and the bracket (B) to the stabilizer bar.
2. Connect the stabilizer link (A) with the stabilizer bar by tightening the nut.
Tightening torque :
100 - 120N.m (10.0 - 12.0kgf.m, 72 - 87lb-ft)
3. Install the stabilizer to the sub-frame by tightening the bracket (A) mounting bolts.
Tightening torque :
50 - 65N.m (5.0 - 6.5kgf.m, 40 - 47lb-ft)
4. Install the sub-frame (A) and stay.
Tightening torque
Sub-frame mounting bolts:
140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)
Sub-frame stay mounting bolts & nuts:
70 - 90N.m (7.0 - 9.0kgf.m, 51 - 65lb-ft)