Veracruz FWD V6-3.8L (2009)
Suspension Strut / Shock Absorber: Procedures
Shocks
Disposal
1. Fully extend the piston rod.
2. Drill a hole on the (A) section to discharge gas from the cylinder.
CAUTION:
The gas coming out is harmless, but be careful of chips that may fly when drilling. Be sure to wear safety goggles or eye protection when
performing this task.
Struts
Disposal
1. Fully extend the piston rod.
2. Drill a hole on the (A) section to discharge gas from the cylinder.
CAUTION:
The gas coming out is harmless, but be careful of chips that may fly when drilling. Be sure to wear safety goggles or eye protection when
performing this task.
