Veracruz FWD V6-3.8L (2009)
2. Remove the both boot clamps from the differential side TJ case.
3. Pull out the boot from the differential side joint(TJ).
4. While dividing joint(TJ) boot (A) of the differential side, wipe the grease in TJ case (B) and collect them respectively.
CAUTION:
-
Be careful not to damage the boot.
-
According to below the illustrated, put marks (D) on roller of trunnion assembly (A), TJ case (B) and spline part (C), for providing assembly.
5. Using a snap ring plier or flat-tipped (-) screwdriver, remove the circlip (A).
