Veracruz FWD V6-3.8L (2009)
3. Install the bands to both BJ boots.
4. Using the SST(09495-3K000), secure the boot bands.
Clearance (A): 2.0 mm (0.079 in.) or less
5. Install the TJ boot bands and TJ boot.
6. Install the trunnion assembly (A) and the circlip (E) to the spline (C) on the driveshaft.
At this time align the marks (D) each other.
7. Add the specified grease to the TJ as mush as wiped away at inspection.
8. Install the TJ boots.
9. To control the air in the TJ boot, keep the specified distance between the boot bands when they are tightened.
