Veracruz FWD V6-3.8L (2009)
8. Install the spacer selected above, the taper roller bearings and the hypoid gear shaft assembly (47308-24000/24010). And preload the assembly
without the spacer(Hypoid gear shaft assembly-Transfer cover side) with 100 to 200N.
9. Measure the dimension L after 10 rotations.
10. Measure the dimension M on transfer cover (47314-24000).
11. Select the spacer thickness from the chart below. Thickness S3=M-L+(0.09 to 0.12mm) preload.
