Veracruz FWD V6-3.8L (2009)
Heated Glass Element Relay: Testing and Inspection
Rear Glass Defogger Relay
Inspection
1. Disconnect the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.
4. There should be continuity between the No.7 in the I/P-E and No.4 terminal in the I/P-A when power and ground are connected to the No.4
terminal in the I/P-A and No.2 terminal in the I/P-J.
5. There should be no continuity between the No.7 terminal in the I/P-E and No.4 terminal in the I/P-A when power is disconnected.
