XG 350 V6-3.5L (2002)
2. Remove the front bumper cover upper mounting nut.
3. Remove the front bumper cover retainer in the upper side and lower side.
4. Remove the front bumper cover mounting screw in the corner of front bumper.
5. Loosen the retainers in the radiator grille and remove the front bumper cover from the front bumper rail.
6. Remove the front bumper rail after removing the mounting nuts.
Tightening torque
Bumper rail mounting nuts:
9 - 14 Nm (90 - 140 kg.cm, 6.5 - 10.1 lb.ft)
7. Installation is the reverse of removal.