XG 350 V6-3.5L (2002)
4. Rear pillar trim
5. Rear window lower cover molding
6. Roof assist handle
2. Disconnect the rear window defogger connector and window antenna connector.
3. Pull down the rear of the headliner.
4. In order to protect the body (paint surface), apply cloth tape around to body flange the installed rear window glass.
5. Use the special tool (09861 - 31100) to cut through the sealant.
6. Make mating marks on the glass and body if the glass is to be reinstalled.
NOTE: Use chalk or equivalent to make mating marks on the glass and body.
7. Take out the windshield glass with the special tool (09861 - 31400).
INSTALLATION