Infiniti Workshop Service and Repair Manuals

Body Control Module: Service and Repair
Removal and Installation

BCM (BODY CONTROL MODULE)

Removal and Installation

CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification.  See: Testing and
Inspection/Programming and Relearning

REMOVAL
1. Remove dash side finisher (passenger side). Refer to See: Interior Moulding / Trim/Trim Panel/Service and Repair/Exploded View.
2. Remove bolt and nut.
3. Remove BCM and disconnect the connector.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
-

Be sure to perform "WRITE CONFIGURATION" when replacing BCM.

-

Be sure to perform the system initialization (NATS) when replacing BCM. Refer to See: Testing and Inspection/Programming and
Relearning/Configuration (BCM)/Special Repair Requirement.