EX35 AWD V6-3.5L (VQ35HR) (2009)
Carpet: Service and Repair
Floor Trim
FLOOR TRIM
Removal and Installation
REMOVAL
1. Remove front seat (LH/RH). Refer to See: Seats/Service and Repair/Front Seat/Removal and Installation.
2. Remove rear seat cushion. Refer to See: Seats/Service and Repair/Rear Seat/Removal and Installation.
3. Remove accelerator pedal pad. Refer to See: Powertrain Management/Fuel Delivery and Air Induction/Accelerator Pedal/Service and
Repair/Removal and Installation.
4. Disengage clip of floor hook (1) with remover tool (A).
5. Remove foot grille (LH/RH). Refer to See: Heating and Air Conditioning/Air Duct/Service and Repair/Foot Grille.
6. Remove front seat belt floor anchor bolt (LH/RH). Refer to See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Front
Seat Belt/Exploded View.
7. Remove center console assembly. Refer to See: Console/Service and Repair/Removal and Installation.
8. Remove instrument lower cover, instrument driver lower panel, instrument assist lower panel and instrument side panel (LH/RH). Refer to See:
Dashboard / Instrument Panel/Service and Repair/Removal and Installation.
9. Remove G-sensor (1). Refer to See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Yaw Rate Sensor/Service and
Repair/Removal and Installation.
10. Remove diagnosis sensor unit (2). Refer to See: Relays and Modules/Relays and Modules - Restraint Systems/Air Bag Control Module/Service
and Repair/Removal and Installation.
11. Remove console rear bracket (3). Refer to See: Console/Service and Repair/Removal and Installation.
12. Remove floor harness mounting clamps (A).
13. Remove dash side finisher (LH/RH), front kicking plate inner (LH/RH) and body side welt (LH/RH). Refer to See: Trim Panel/Service and
Repair/Body Side Trim.
14. Remove floor trim mounting clips and fixing nuts.