EX35 AWD V6-3.5L (VQ35HR) (2009)
Yaw Rate Sensor: Service and Repair
Removal and Installation
YAW RATE/SIDE G SENSOR
Removal and Installation
REMOVAL
CAUTION:
Do not drop or strike yaw rate/side G sensor, or do not use power tool etc., because yaw rate/side G sensor is sensitive to the impact.
1. Remove center console. Refer to See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Exploded View.
2. Disconnect yaw rate/side G sensor harness connector.
3. Remove mounting bolts. Remove yaw rate/side G sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Do not drop or strike yaw rate/side G sensor, or do not use power tool etc., because yaw rate/side G sensor is sensitive to the impact.