EX35 AWD V6-3.5L (VQ35HR) (2009)
Collision Avoidance Module: Service and Repair
Removal and Installation
ICC SENSOR INTEGRATED UNIT
Removal and Installation
REMOVAL
1. Remove front bumper fascia. Refer to See: Body and Frame/Bumper/Front Bumper/Service and Repair/Exploded View.
2. Disconnect ICC sensor integrated unit connector.
3. Remove mounting bolts from ICC sensor integrated unit.
4. Remove ICC sensor integrated unit.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Always perform the laser beam aiming adjustment and check the operation after the replacement, removal, and installation of ICC sensor
integrated unit. Refer to See: Cruise Control/Service and Repair/Procedures/Additional Service When Replacing Control
Unit/Description/DCA See: Cruise Control/Service and Repair/Procedures/Additional Service When Replacing Control Unit/Special Repair
Requirement/DCA See: Cruise Control/Service and Repair/Procedures/Additional Service When Replacing Control Unit/Description/DCA
See: Cruise Control/Service and Repair/Procedures/Additional Service When Replacing Control Unit (Accelerator Pedal Assembly),
"ADDITIONAL SERVICE
WHEN REPLACING CONTROL UNIT (ICC SENSOR INTEGRATED UNIT) : Description".