EX35 AWD V6-3.5L (VQ35HR) (2009)
-
Refer to the following when installing oil pan (2) (with oil pan gasket) and clips (1) to transmission case.
CAUTION:
-
Never reuse oil pan gasket and oil pan mounting bolts.
-
Install oil pan gasket in the direction to align hole position.
-
Install it so that drain plug comes to the position as shown in the figure.
-
Be careful not to pinch harnesses.
-
Completely remove all moisture, oil and old gasket, etc. from oil pan mounting surface.
- Tighten oil pan mounting bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Tighten oil pan
mounting bolts to the specified torque.