EX35 RWD V6-3.5L (VQ35HR) (2008)
PWO-5 Exploded View
CONSOLE POWER SOCKET : Removal and Installation
REMOVAL
1. Remove the console finisher.
2. Disconnect the power socket connector (A).
3. Pull out the inner socket (1) by pushing the ring pawl (B) from the inner socket hole (square) (C).
4. Remove the ring (2) from the console finisher while pressing pawls.
INSTALLATION
Install in the reverse order of removal.
NOTE: Align the inner socket, the ring and the console finisher cut out.