EX35 RWD V6-3.5L (VQ35HR) (2008)
Power Seat Control Module: Service and Repair
Driver Seat Control Unit
ON-VEHICLE REPAIR
DRIVER SEAT CONTROL UNIT
Removal and Installation
REMOVAL
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
1. Remove the driver seat (1).
2. Remove the mounting bolts (A).
3. Remove driver seat control unit (2).
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to clump the harness to the right place.
NOTE: After installing the driver seat, perform additional service when replacing control unit. Refer to ADP-8, "ADDITIONAL SERVICE WHEN
REPLACING CONTROL UNIT : Description". See: Accessories and Optional Equipment/Memory Positioning Systems/Testing and
Inspection/Programming and Relearning/Additional Service When Removing Battery Negative Terminal